Setting administrative options, System setup, Application settings – Luminex xPONENT 4.0 SP1 User Manual

Page 114: Arrange main navigation buttons, Lis settings, Maintenance options, External analysis program settings

Advertising
background image

Luminex xPONENT 4.O Software Manual

102

To display software information, click the blue question mark at the top of the xPONENT
window, then click About Luminex xPONENT. The xPONENT information dialog box
opens, displaying the software version information.

Setting Administrative Options

Click Admin on the toolbar to display the tabs used to set administrative options.

System Setup

You must have xPONENT administrative privileges to perform System Setup tasks.

Application Settings

Use Application Settings to define how the software runs and displays.

1. Select the options you want to enable in the software. For a description of each option,

see “Application Settings” on page 82.

2. Click Save.

Arrange Main Navigation Buttons

Use this section to customize the main pages at the top of the xPONENT software.

1. Select or clear the check boxes by each page name to hide or display the main pages.
2. Click a page name and use the up and down arrows to change the order in which the

pages display, from left to right.

3. Click Save.

Click Default if you want to restore the default navigation.

LIS Settings

You must have the LIS version of the software to perform this task.

To connect to the LIS, check Connect to LIS. Type the location where the incoming
orders are stored in the Watch folder for incoming orders box, or click Browse to
choose a destination.

Maintenance Options

To choose a system initialization option:

1. In the System Initialization Procedure list, click the option you wish to use.
2. Click Save.

External Analysis Program Settings

To add an external analysis program:

1. If the program is on an external media source such as a CD or flash drive, insert the

media into the appropriate drive on the PC.

2. Click Add New to open the New External Analysis Program dialog box.
3. Type a name for the external analysis program.

Advertising