Create a new batch from a new protocol, Settings tab – Luminex xPONENT 4.0 SP1 User Manual

Page 36

Advertising
background image

Luminex xPONENT 4.0 Software Manual

24

Expiration

Manufacturer

Save. Saves the information as a pending batch.

Cancel. Returns to the Batches tab.

Back. Returns to the previous window.

Run Batch. Runs the batch and opens the Current Batch tab, where you can monitor the
batch as it runs.

Create a New Batch From a New Protocol

Click Create a New Batch from a new Protocol to create a new batch without using a
protocol. The Settings tab opens. Raw data results write to a.CSV file. You can define
parameters for samples, gates, regions, events, and commands.

NOTE:

If the batch spans more than one plate, the tray ejects
automatically when all defined wells have been acquired. A dialog
box displays prompting you to insert the next plate.

Settings Tab

Use this tab to name your new batch and configure acquisition settings.

FIGURE 13.

Settings Tab

This tab contains the following:

Advertising