Luminex xPONENT 4.0 SP1 - Manual (Page 48)

Luminex xPONENT 4.0 Software Manual
36
FIGURE 23. Multibatch Report dialog box
New Batch. Opens the Create New Batch tab. Create your new batch. Click Save to
return to the New Multibatch tab.
Add. Opens the Select Pending Batch box.Add a batch from the available options,
including batches newly created.The selected batch then appears on the plate layout. If
the batches selected do not fit on the plate, a Multi-Batch error dialog box opens,
indicating you must edit one or more of the selected batches. The Multi-batch feature will
automatically set the batches side-by-side if space remains on the plate. After you add
each batch, the software automatically adds the next batch to the first well of the next
column or row (depending on the plate direction). You can also select a well first, which
places the next batch in your chosen location.
Remove. Removes a selected batch in the Multi-Batch list. The batch will still remain in
the Pending Batches section (This button only appears if you have added a batch to the
Multi-Batch list and selected the batch from the list).
Cancel. Returns to the main Batches tab without saving.
Run. Runs the batch.