Luminex xPONENT 4.0 SP1 - Manual (Page 60)

Luminex xPONENT 4.0 Software Manual
48
Results Tab
FIGURE 30. Results Tab
The Results tab has the same Save Image, Progress, Well Report, and 3-D buttons as
the Current Batch tab. For more information about these buttons, see “Current Batch
Tab” on page 37. The following buttons are added to the Results tab:
• Formula - Opens the Change Analysis dialog box with a list of analytes used in the
batch. Click an analyte to open the Analysis Settings dialog box from which you can
select a new analysis setting for the analyte. For more information, see “Analysis
Settings Dialog Box” on page 28.
• Approve - Opens the Batch Approval Confirmation dialog box, which contains the
data for analytes selected in the Results tab. Click Yes to approve the batch. The
dialog box confirms the approval.
• Validate - Validates an entire selected row or cell in the Results table. Average rows or
cells cannot be selected. If you haven’t selected an item or the item you selected does
not need to be validated, a warning dialog box displays.
• Invalidate - Invalidates an entire selected row or cell in the Results table. The
selection will turn red when invalidated. Select the same item and click Validate to
remove the invalidation status.
• Save - Saves the batch. This button only appears if a change has been made to the
batch.
• Analyze - Analyzes data that has been invalidated. This button only appears if you
have clicked Invalidate on a portion of the data, or if you have clicked Validate on an
invalidated portion of the data. This will analyze the data again with the invalidated
standard removed.
• Close - Closes the batch and reopens the Saved Batches tab.