Maintenance – Luminex xPONENT 4.0 SP1 User Manual

Page 80

Advertising
background image

Luminex xPONENT 4.0 Software Manual

68

1:2 - Halves the standard from each previous iteration.

1:10 (Log) - Computes a value of one-tenth of the standard from each previous
iteration.

1/2 Log - Creates a 1:3.16 dilution, or half of each 1:10 (Log) from each previous
iteration.

Alternatively, type a number for your own dilution factor.

Apply Dilution - Applies the dilution selected in the Dilution list.

NOTE:

Click a column header to resort the display.

NOTE:

Click the Reagent column header to resort the order from the
highest number standard to standard number one. This is useful
for applying dilutions in which the last standard is the highest
standard.

Assay Control Information. Lists the selected control reagents. The list displays the
Reagent, Name, Lot Number, Expiration, and Manufacturer. Existing control lot
information can be applied or new information can be typed manually.

Apply Ctrl Lot - Opens the Select Lot dialog box. Select a lot from the list and then
click OK.

Show Value - Expected, Low, and High set the expected, lowest, or highest
acceptable concentration of the analyte in the sample.

Apply Values - Applies a value down or across the list of analytes.

Cancel. Reopens the Protocols tab.

Save. Saves the lot and kit information for the selected protocol.

Maintenance

Use the Maintenance page to maintain and calibrate your system. This page contains the
following tabs:

Auto Maint

Lot Management

Cmds & Routines

Probe & Heater

System Info

System Status

Schedule

Support Utility

Advertising