Luminex xPONENT 4.0 SP1 - Manual (Page 83)

71
Touring the Software
• Calibrator - If a calibration reagent is selected, the Lot Details table displays Channel
and Target information.
• Verifier - If a verification reagent is selected, the Lot Details table displays target
information.
Import Kit. Opens the Import Calibration or Performance Kit dialog box to import a kit.
Import. Opens the Import Calibrator or Verification Lot dialog box to import a lot.
Export. Opens the Export Calibrator or Verification Lot dialog box. Select a name and
location to save the calibrator or verification lot and click Save.
Add New. Adds a new lot. Add information in the Lot Details section on the right side of
the window. Type a Lot #, Expiration, and target in the appropriate boxes and fields. Click
Save to save the lot, or select Cancel to cancel the entry.
Delete. Deletes a lot selected in the Active Reagents list.
Cmds & Routines Tab
Use this tab to create a routine or to edit, delete, or run a selected routine or command.
You can also run one or more maintenance commands with or without saving them as a
routine.
CAUTION: The sheath fluid and the solution in which beads are stored
contain proclin, which may cause an allergic reaction. Use
personal protective equipment, including gloves and safety
glasses.
FIGURE 47. Cmds & Routines Tab