Luminex xPONENT 4.0 SP1 User Manual
Page 88
Luminex xPONENT 4.0 Software Manual
76
Plate Heater. Sets the temperature of the plate to the number typed in the Set
Temperature box. Up and down arrows allow half-degree adjustments of the temperature,
and Apply activates the adjustment. Current and Target temperatures display at the
bottom of this section.
NOTE:
The temperature range is 35 to 60° Celsius.
WARNING:
Be advised that the plate heater can become hot enough to cause
injury. Use caution when handling after heating.
Delete. Deletes the current plate from the available plates in the Plate Name list.
Save Plate. Appears when you have typed a new plate name in the Plate Name list, and
is used to save the current plate and height adjustments. Once saved, the plate will be
available for future use by selecting if from the Plate Name list.