Luminex xPONENT 3.1 Rev 2 - Manual (Page 73)

• System Status
• Schedule
• Support Utility
Auto Maint Tab
This tab contains routines to initialize, verify, and maintain the analyzer.
FIGURE 33. Auto Maint Tab
Automated Maintenance Options - Provides buttons for commonly used maintenance
routines for the machine. Select from the following:
• System Initialization - Select this routine to initialize the system.
• Performance Verification - Select this routine to use with the Performance Verification kit.
• Calibration / Verification - Select this routine to use with the Calibration/Verification kit.
• System Shutdown - Select this routine to perform a pre-defined system shutdown.
• Alcohol Flush - Select this routine to run a single alcohol flush.
• Sanitize - Select this routine to run a sanitize command.
The commands for these routines display in the command list below the buttons.
Command - This list is used to view the name of the current command, its well location, its
status, and information about the command. Only the current commands appear in the box.
xPONENT ® 3.1 Rev. 2
60