Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 42)

FIGURE 19. Batch Plate Layout Report
Approve - Opens the Batch Approval Confirmation dialog box to approve the selected
batch. Only approved batches can be transmitted to the LIS. If your software is licensed for
LIS use, you can transmit batches to the LIS from the Sample Results tab. Once you have
approved a batch, the status of the batch changes to Approved in the Completed Batches
list.
Exp Results - Opens the Save As dialog box to choose an export destination for the .CSV
file containing your results.
Import - Opens the Open dialog box to choose a batch file (.mdf) to import. Select Include
Raw Files (LXB) to import the raw data file as well.
Export - Opens the Export Batch dialog box to choose a destination for the batch file (.mdf).
Select Include Raw Files (LXB) to include the raw file in the export. Select Overwrite to
overwrite pre-existing files.
Replay - Opens the Select Replay Mode dialog box.
Replay a batch to replay the raw bead data files. The bead data files will be replayed using
the gate, analyte, analysis settings, and plate layout selected in the protocol. Settings such as
bead type, volume, timeout, XY Heater, and report gain will have no effect.
Open - Opens the Results tab. Use this tab to view the saved batch results for the selected
batch.
xPONENT ® 3.1 Rev. 2 Software User Manual
32
For In Vitro Diagnostic Use