Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 57)

• Performance Verification Kit - Select a performance verification kit from this list. Details
of the selected kit display in the Lot Type, Active Lot Number, and Expiration Date
fields.
• Delete Kit - These buttons delete the selected calibration or performance verification kit.
• Active Lot Number - Select an active lot number for the selected reagent from this list.
Lot Details - Displays lot information for the selected reagent in the Active Reagents
section.
• Lot Type - Displays the lot type selected in the Active Reagents section to the left.
• Lot # - Displays the lot number selected in the Active Reagents section to the left.
• Expiration: - Displays the expiration date for the lot type selected in the Active Reagents
section to the left.
• Calibrator - If a calibration reagent is selected, the Lot Details table displays Channel
and Target information.
• Target Verifier - If a verification reagent is selected, the Lot Details table displays target
information.
Import Kit - Opens the Import Calibration or Performance Kit dialog box to import a kit.
Import - Opens the Import Calibrator or Verification Lot dialog box to import a lot.
Export - Opens the Export Calibrator or Verification Lot dialog box to export a lot.
Add New - Adds a new lot. Add information in the Lot Details section on the right side of the
window. Type a Lot #, Expiration, and target in the appropriate boxes and fields. Click Save
to save the lot, or select Cancel to cancel the entry.
Cmds & Routines Tab
Use this tab to create a routine or to edit, delete, or run a selected routine or command. You
can also run one or more maintenance commands with or without saving them as a routine.
CAUTION: The sheath fluid and the solution in which beads are stored
contain ProClin
® , which may cause an allergic reaction. Use
personal protective equipment, including gloves and safety
glasses.
This tab contains the following:
For In Vitro Diagnostic Use Touring the Software
47