Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 60)

Command Sequence - When you select a routine, the individual commands in the routine
appear in order in the Command Sequence list. The list includes the name of each
command, location, status, and any additional information.
Clear - Clears the highlighted command in the Command Sequence list.
Clear All - Clears all commands in the Command Sequence list.
Report - Opens the Reports tab with the Calibration Summary selected in the Report: list.
Click Generate to view the selected report.
Import - Displays the Open dialog box to select a routine file (.lxd) to import. Select a file and
click Open to import it.
Export - Opens the Save As dialog box to specify a file name and location to save a Routine
file.
Save As - Opens the Save Routine dialog box. Choose a routine name to save the routine
under. After saving, the new routine will then appear in the Routine Name list. This button
only appears if a new routine has been made.
Cancel - Cancels changes made to the default location of one of the commands in the
Command Sequence. Click it to cancel those changes. This button only appears if changes
have been made to the command sequence.
Delete - Opens the Delete Maintenance Routine Confirmation dialog box. Click Yes to
delete the routine. Once deleted, it will no longer appear in the Routine Name list. This
button appears if you have selected a non-Luminex routine in the Routine Name list.
Run - Runs the selected routine or command.
Probe and Heater Tab
Use this tab to adjust the probe height and plate heater settings.
xPONENT ® 3.1 Rev. 2 Software User Manual
50
For In Vitro Diagnostic Use