Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 95)

are working with more than one plate, choose the Add & Change Plate drop down list.
Here, you can add a plate, change the order of the plates, and scroll through all plates.
• As you add commands to your plate, they appear in the command sequence list. Here,
you can give each of your wells an ID. You can also import an ID list and move your
commands up and down in the command sequence chart.
NOTE: Only wells that were acquired in the original batch can be replayed.
10. Click Replay Batch. The Current Batch tab opens, where you can view the data as it is
replayed.
Analyze Saved Batch
Click Results on the xPONENT toolbar, then open the Saved Batches tab. Click the batch
name, then click Open. The Results, Settings, Log, and Sample Details tabs appear.
• Click the Results tab to view statistical information about the batch. See Sample Details
Tab .
• Click the Settings tab to view the batch settings report. See Settings Tab
• Click the Log tab to view a log for the activity that occurred during acquisition of the
selected batch. See Log Tab .
• Click the Sample Details tab to view sample details for each sample in the batch. If you
are using the LIS package, click Transmit to transmit the data to the LIS.
Validate Standards
Your xPONENT ® system administrator must give you privileges to validate standards if you
are using the Secure xPONENT ® package. All standards are assumed to be valid unless
explicitly invalidated.
1. Open the Results page.
2. Open the Saved Batches tab.
3. Click the batch name, then click Open. The Results tab opens.
4. Click the square area next to left of the standard you wish to validate, then click Validate.
View Batch Settings
1. Open the Results page, then open the Saved Batches tab.
2. Click Saved Batches, then click the batch for which you want to view details.
3. Click Open, then click the Settings tab.
4. Click the left and right Page arrows to view the pages of the batch settings report.
5. Click Save to open the Save As dialog box. Navigate to the location you wish to save the
batch settings report, and click Save.
Viewing Batch Logs
1. Open the Results page, then open the Saved Batches tab.
2. Click Saved Batches, then click the batch for which you want to view details.
3. Click Open. The Results tab opens.
4. Click Log to open the Log tab.
For In Vitro Diagnostic Use Using the Software
85