Luminex xPONENT for MAGPIX - Manual (Page 108)

• Expiration - Displays the expiration date for the lot type selected in the Active section to
the left.
• Calibrator - If a calibration reagent is selected, the Lot Details table displays Channel and
Target information.
• Verifier - If a verification reagent is selected, the Lot Details table displays target
information.
Drive Fluid Level -
The Drive Fluid liquid level sensor warns you when there is enough Drive Fluid in the
container to run one plate or less. You can enter a Drive Fluid lot number on this page. The
lot number is optional.
Import Kit - Opens the Import Calibration Kit or Performance Kit dialog box to import a kit.
Import - Opens the Import Calibrator or Verification Lot dialog box to import a lot.
Export - Opens the Export Calibrator or Verification Lot dialog box to export a lot or kit.
Add New - Adds a new lot. Add information in the Lot Details section on the right side of the
window. Type a Lot #, Expiration, and target values in the appropriate boxes and fields.
Delete - To delete a lot or kit, select it and click Delete. The Delete Maintenance Lot
confirmation dialog box appears. Click Yes or No.
Performing Individual Maintenance Commands
The Auto Maint tab on the Maintenance page displays the automated maintenance options.
To perform an individual maintenance command, click the appropriate button in the Cmds &
Routines tab.
CAUTION: Lack of proper maintenance can lead to inaccurate test results
and failure of system components. Follow all scheduled
maintenance routines to ensure proper functioning of your
system.
Cmds and Routines Tab
Use this tab to create a routine or to edit, delete, or run a selected routine or command. You
can also run one or more maintenance commands with or without saving them as a routine.
Performing System Maintenance
95