Luminex xPONENT for MAGPIX - Manual (Page 117)

• Drive Fluid
• Waste Fluid
Items in this list relating to calibration and verification have one of the following states:
• Passed - Indicates that the process completed successfully.
• Failed - Indicates that the process was not completed successfully. Failed items appear in
red.
• Not Current - Indicates that verifiers are not current. Verifiers are not current if you have
calibrated the system since the last time you ran the controls.
• Not Yet Run - Indicates that this process has not yet been run on the machine.
Copy - Copies the system information to the Windows clipboard. You can then paste it into a
text editor such as Notepad.
Save - Opens the Save As dialog box to specify a file name and location to save the system
information file.
System Status Tab
To access this tab, open the Maintenance page and click the System Status tab. Use this
tab to view, print, and save system status log information. You can also access this
information by clicking System Status on the System Monitor.
xPONENT for MAGPIX
104