Luminex xPONENT for MAGPIX - Manual (Page 55)

• Protocols - Displays when Create a New Batch from an existing Protocol is clicked.
• Stds & Ctrls - Displays when Create a New Batch from an existing Protocol is clicked.
• Plate Layout - Displays when Create a New Batch from an existing Protocol is clicked.
• New MultiBatch - Displays when Create a New Multi-Batch is clicked.
NOTE: These tabs (except New MultiBatch) are sequential. You must
complete each screen in a specific order.
FIGURE 19. Batches Page
The following fields and actions are available on the Batches tab:
The Pending Batches list displays the name of the protocol used with the batch, the protocol
version, date, and status for each pending batch. The following buttons only appear if the
pending batches have data:
Single Step - Instructs the system to acquire one well and then pause. This ensures that the
system is working correctly before you run an entire batch.
Save Prtcl. - Saves protocol and/or assay information for a standard/control.
Plate Layout - Opens the Report dialog box, which includes the Batch Plate Layout
Report. Confirm that the plate layout conforms to your specific assay instructions.
Import - Imports a batch.
xPONENT for MAGPIX
42