Luminex xPONENT for MAGPIX User Manual

Page 67

Advertising
background image

FIGURE 25.

Analytes Tab

This tab contains the following:

Analyte grid - A grid representing each analyte from 1 to 50. Select All selects all analytes,
and Deselect All deselects all analytes. Click a numbered analyte to select it; click the
analyte again to deselect it. You can also click and drag to select groups of analytes.
Selected analytes are red. Deselected analytes are gray. An analyte marked as an intra-well
normalization bead is blue.

Default Analysis - The default analysis changes based on the Analysis Type selected in
the Settings tab. You can change the analysis settings for all analytes by clicking Change if
this button is enabled in this tab. This displays the Analysis Settings dialog box.

xPONENT for MAGPIX
54

Advertising