Luminex xPONENT for MAGPIX - Manual (Page 70)

FIGURE 27. Protocols Tab
This tab contains the following:
Batch Name/Description - Used to name and describe a batch.
Select a Protocol - Contains the protocol name, version, manufacturer, and creation date for
each protocol.
Active Reagents - Displays assay and control lots/kits associated with the selected protocol.
The Standard/Ctrls Kit Name - Lot# field displays the assay standard/control kit/lot name
and lot number currently associated with the selected protocol. The Standard Lots and
Controls Lots fields display any standard or control lots associated with the selected
protocol.
Cancel - Returns to the main Batches tab.
Next - If you have selected a protocol with no standards or controls (displayed as None in the
Active Reagents section), clicking Next continues to the Plate Layout tab. Confirm that the
plate layout conforms to your specific assay instructions. If you have selected a protocol with
standards and controls, clicking Next continues to the Stds & Ctrls tab.
Stds and Ctrls Tab
Use this tab to apply a kit or lot to the batch. Standards and controls are also accessible from
the Protocols page.
Using xPONENT
57