Luminex xPONENT for MAGPIX - Manual (Page 95)

Select a system log report, a date from the Date list, and click Generate to generate the
report.
Advanced Reports - Enables a single option, User Report, in the list.
Click Generate to generate the report.
NOTE: Install the printer before initiating the Print command.
To generate, view, and print a report:
1. Open the Results page, then open the Reports tab.
2. In the Report list, click the report you want to view.
3. In the Type list, select the report type you want to view.
4. Select the item for which you want to generate the report. If you are creating a batch
report, select the analyte to include in the report.
5. Click Generate. The report displays in the lower part of the Reports tab.
6. Click Print to print the report, or Save to save the report.
Using Protocols, Lots, and Kits
Protocols for IVD assay kits should be supplied by the IVD kit manufacturer.
Creating an Allele Call Protocol
This protocol contains no standards or controls. An allele call compares groups of two, three,
or four analytes to identify genotypes.
To create an allele call protocol:
1. Open the Protocols page, then open the Protocols tab. Click Create New Protocol.
The Protocol Settings tab opens.
2. In the Name box, type the name of the protocol.
3. In the Description box, type a description of the protocol.
4. In the Version box, type the version of the protocol.
5. In the Manufacturer box, type the manufacturer information for the protocol.
6. Define the settings in the Acquisition Settings section. For information about each of
these settings, #unique_117 .
7. Define settings in the Analysis Settings section, selecting Allele Call as the analysis
type. For information about the settings in this section, #unique_117 .
8. Click Next. The Analytes tab opens.
9. Click the desired analyte (bead ID) in the numbered grid. Information about the analyte
appears in a list on the right side of the grid. For an allele call analysis, you must select a
group of two, three, or four analytes.
10. Click Group to group the analytes for the allele call. The grouped analytes display in a list
to the right. Select more analytes and then click Group again if you want to add another
group to the analysis.
11. Click and type an analyte name in the Name column to the right of the analyte grid.
xPONENT for MAGPIX
82