Micromod RetroPAK: SLC Configuration Manual User Manual
Training, Command series migration to mod 30ml
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Cover
- Contents
- Introduction
- Function Codes - Gallery Tutorial
- FOREWORD
- OBJECTIVES
- INSTRUCTIONS – CREATING A NEW WORKSPACE, PROJECT AND DOCUMEN
- CONFIGURING SCAN GROUPS AND LOOP COMPOUNDS
- ADDING COMPOUND FROM THE GALLERY
- ADDING I/O
- MAKING CONNECTIONS
- CHANGING ENGINEERING RANGES AND ALARM TRIP VALUES
- CONFIGURING DISPLAY TAG FOR THE PID DISPLAY
- SAVING DOCUMENTS
- SETTING UP COMMUNICATIONS WITH MODBUS
- COMPILING THE DATABASE
- P1 Single Loop
- P2 Dual Loop
- P3 PID Remote SP
- P4 Dual PID RSP
- P5 PID Cascade
- P6 PID Ratio
- FC1 - Function Generator
- FC2 - Manual Set Constant
- FC3 - Lead / Lag
- FC6 - High / Low Limiter
- FC7 - Square Root
- FC8 - Rate Limiter
- FC9 - Analog Transfer
- FC10 - High Select
- FC11 - Low Select
- FC12 - High / Low Compare
- FC14 - Summer
- FC15 - Summer (2 Inputs)
- FC16 - Multiply
- FC17 - Divide
- FC20 - Indicator Station
- FC25 and 41 - Analog / Digital Input
- FC28 - Analog / Digital Output
- FC33 - NOT
- FC34 - Memory (RS Flip Flop)
- FC35 - Timer
- FC36 - Qualified OR
- FC37 - AND (2 Input)
- FC38 - AND (4 Input)
- FC39 - OR (2 Input)
- FC40 - OR (4 Input)
- FC41 - See FC25
- FC51 - Manual Set Constant
- FC59 - Digital Transfer
- FC65 - Digital Sum with Gain
- FC156 - PID with Local SP
- FC156 - PID (Cascade)
- FC156 - PID with Remote SP
- FC156 - PID Ratio with RSP
- FC 156 PID with Manual / Auto Station
- FC156 - Auto Bias Station
- FC165 - Moving Average
- Extras - Reject to Manual
- Rear Cover