Micromod MOD: MODCELL Application Builder Software - Manual (Page 46)

Application Builder
TOOLBAR REFERENCE
4.13 REPORT OPTIONS
Select the Report Options icon to display the different report options icons.
The choices available are Database report, Export to DXF, and Screen dump to
printer (Graphic icon). Use the Cancel icon to exit from the submenu.
4.13.1 Database Reports
Select the Database Reports icon to get the report options menu. Select the
type of report you want (Database Blocks and/or Control Connection Lists). If
you choose both of these, the options previously disabled (By Block and By
Compound) will become available. These allow you to choose whether the
connections are printed on a per block basis or at the end of all the blocks on a
per compound basis. Also available are the options of sending the report to
the printer and/or a disk file. The file name defaults to the strategy name with
a ".RPT" extension in the current directory path. To set up your preferences,
select the preferences button.
NOTE: Any instrument, block or compound that is password protected will
report tag name and description only unless you are in the compound
and report from current compound and below.
4-16