Micromod MOD: MODCELL Application Builder Software - Manual (Page 75)

Application Builder
CONFIGURATION
5.5.2 Tables Block Selection
The piecewise table function block can only be placed in a loop compound.
PW Piecewise Table Block. Reference IB-23G602 Section 9. This block is
a data block that supports 60 pairs of X,Y floating point coordinates for
user defined linearizations or recipe data. Linearization data is sent to
the LN block using the TABLEOUT connection. Recipe data is available
on a per point basis.
5.5.3 Input Function Block Selection
Input function blocks can only be placed in a loop compound. The input
function block types are:
Input Function Block Types:
DI
Digital Input Block. Reference IB-23G600 Section 7.3. This block links
a Digital Input Module (DIM) block to a loop.
VCI Voltage/Current Input Block. Reference IB-23G600 Section 7.2. This
block links a Voltage/Current Module (VCIM) block to a loop.
CJI Cold Junction Input Block. Reference IB-23G600 Section 7.2. This
block links a Cold Junction Input Module (CJIM) block to a loop.
TI Thermocouple Input Block. Reference IB-23G600 Section 7.2. This
block links a Thermocouple Module (TIM) block to a loop. It also gets
a compensation input from a RIM, WRIM, or CJIM module.
TTI Thermocouple Transmitter Input Block. Reference IB-23G600
Section 7.2. This block links a Voltage/Current Module (VCIM) block to
a loop.
RI Resistance Input Block. Reference IB-23G600 Section 7.2. This block
links a Resistance Input Module (RIM) or a Wide Resistance Input
Module (WRIM) block to a loop.
RTI RTD Input Block. Reference IB-23G600 Section 7.2. This block links
a RTD input from a Resistance Input Module (RIM) or a Wide
Resistance Input Module (WRIM) block to a loop.
RTTI RTD Transmitter Input Block. Reference IB-23G600 Section 7.2. This
block links a Voltage/Current Module (VCIM) block to a loop.
5-11