Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 104)

Micro-PWC OPERATOR’S MANUAL
90 Events
will be filtered out, and will not be displayed.
9.3.3.1 Message Class: System Event Messages
System Event messages are displayed in both the Event Review display and the third line of the Mini-
Alarm Window, known as the event display area.
System Event messages are classified into the following types:
• Operator Station Events
• Network Events
• Return to Normal
• Event Acknowledged
• Node Up
• Node Down
• I/O Switchover
System Event messages are displayed in the following format:
<Time><Date><Node><Message>
where Node indicates the node on which the message originated.
9.3.3.2 Clearing and Setting Event Review Message Types
It is possible to clear or set multiple Message Types simultaneously. This eliminates the need to click
numerous toggle buttons. Click Set or Clear to set or clear all Message Types in the selected Message
Class. Click Set All or Clear All to set or clear all Message Types in all Message Classes in the Event
Review display.
9.3.4 Sort Events in the Event Review Display
The order in which event messages are displayed in the Event Review display is determined by the
choices made during configuration of the Micro-PWC’s Alarm Setup, described in the Micro-PWC
Configuration Guide. The system can be configured to display either the newest or oldest event first.
To sort the event messages in the Event Review display, click Sort. The Event Review Sort window
(
Figure 9-3 ) will be displayed.
✎ NOTE
The Display (deselected state) and Don’t Display (selected state)
buttons illustrate button appearance based on state; they are
examples only, and therefore always stippled out, and not available
for actual use.
Figure 9-3. Event Review Sort Window