Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 116)

Micro-PWC OPERATOR’S MANUAL
102 Message Review
The main display area of this window is divided in two portions; the left side is labelled Message Class and
contains buttons which display the available Message Class names. The right side of the main display
area contains a list box, which in turn contains a scrollable list of all the Message Types available for the
selected Message Class. Click the desired Message Class button to select it. Available Message Classes
include:
• Operator Messages
• Priority
• Area
When a new Message Class is selected, the list of Message Types in the list box changes to display the
types available for that Message Class. Each Message Type has a pushbutton associated with it; click this
pushbutton to select or de-select the Message Type.
When a Message Type is selected, messages of that type will be filtered out, and will not be displayed. If a
Message Type is selected, the associated button will appear pressed in, while a de-selected button
appears to be raised. Samples of the Message Type buttons in the selected and de-selected states appear
above the list box; the example for the selected state is labelled Don’t Display, while the example for the
de-selected state is labelled Display. Note that these labels are stippled out, indicating that the sample
buttons are not available for actual use.
Use the Restore button at the bottom of the Message Review Filter window to return to the default filtering
for the current login.
10.3.3.1 Message Class: Operator Messages
Operator messages are displayed in both the Message Review display and the fourth line of the Mini-
Alarm Window, known as the message display area.
TC00082A
Figure 10-3. Message Review Filter Window