Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 128)

Micro-PWC OPERATOR’S MANUAL
114 Utilities
Once all selections have been made, click Restore. The Restore File Selection window ( Figure 11-11 ) will
be displayed.
A pop-up window will be displayed when the restore operation has completed.
11.2.3.1 List Tape Button
To list the contents of a tape, load the tape in the drive and click the List Tape button on the Backup
Operation window (
Figure 11-5 ). The tape will be read and a list of files on the tape will be created; when
this has completed, the list will be displayed in the Tape Listing window.
The Tape Listing window contains an entry for each file on the tape, including the permissions on the file,
the size of the file, the time and date the file was last written, and the path and name of the file.
11.2.3.2 List Disk Button
Before performing a restore operation, it may be useful to compare the tape listing to a listing of the current
contents of portions of the Micro-PWC disk. Click List Disk; a Disk File Selection window will be displayed
(
Figure 11-12 ).
TC00148A
Figure 11-11. Restore File Selection Window
✎ NOTE
This operation only displays information about the data contained
on the tape; no information on the tape (or the disk) is changed.
TC00592A
Figure 11-12. Disk File Selection Window