Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 141)

Micro-PWC OPERATOR’S MANUAL
Utilities 127
To continue with the restoration of Archival Block data, click OK after the desired Start Time (From) and
End Time (To) have been entered. The Restore Operation window (
Figure 11-8 ) will be displayed.
11.4.5 List Archival Block Data
To view a list of files for a specified time interval on an Archival Block backup tape, from the System Win-
dow select Menu > Utilities > Restore Database > List Archival Block. A Restore Operation window (as
shown in
Figure 11-8 ) will be displayed.
Select the desired Device Type (see Section 11.2.2.1, Select a Backup Device Type ). To list the files (vol-
umes) on the tape, click the List Tape button. Note the number associated with the file you wish to list, and
close the List Tape window. Enter the file number in the entry box labelled File. Click OK to complete the
selection. A confirmation window will display the backup type (i.e., Block Database), creation time and
date, and ask:
Is this the correct file?
Click Yes to continue, or click No to return to the Restore Operation window. If Yes is chosen, the Block
List window (
Figure 11-25 ) will be displayed. This window lists the Block Names of the Archival Blocks on
the tape....
✎ NOTE This is the same window used with the Restore utility. Refer to
Section 11.2.3, The Restore Utility , for information on using the
features of this window.
Figure 11-25. Block List Window