Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 150)

Micro-PWC OPERATOR’S MANUAL
136 Utilities
To exit Set mode without making an assignment, click Set a second time. The Quick Keys keypad will
remain on display, allowing the user to use it or make further changes to the Quick Keys.
Once a Quick Key assignment has been made, the user need only access the Quick Keys keypad display
and click on the assigned Quick Key to call up that display in any Operator Window with keyboard focus.
11.11.2.1 Configuring Quick Keys 33 through 64
The basic Quick Keys window contains a minimum of 32 buttons by default. Once all 32 buttons have been
assigned, an additional 32 buttons can be configured, one at a time, for a total of 64 Quick Keys. When
Quick Keys which will appear outside the current Quick Keys pop-up (e.g., Quick Key 33) are configured,
scroll bars appear on the Quick Keys pop-up window. Use the scroll bars to view the newly created Quick
Keys. After the Quick Keys window has been closed, then re-opened, all configured Quick Keys will be
included in the display. The size and shape of the Quick Keys window can be changed using the resize
handles on the window’s frame.
If more than 32 Quick Keys have been configured, and any of them have been cleared, no new Quick Keys
will be created until assignments for all the existing ones have been configured. For example, if 40 Quick
Keys are assigned, then Quick Keys 25 through 30 are cleared, all 40 will remain on display, but new
assignments must be configured for Quick Keys 25 through 30 before Quick Key 41 becomes available.
11.11.2.2 Clearing Quick Key Assignments
Once a Quick Key has been assigned to a display, it cannot be re-assigned to a different display until it has
been cleared. To clear a Quick Ke:y click on the Clear button, then click the Quick Key which is to be
cleared. The cleared Quick Key will then be available for assignment to a different display. To exit Clear
mode without clearing a Quick Key, click Clear again. The Quick Keys keypad will remain on display,
allowing the user to use or make further changes to the Quick Keys.
11.11.2.3 Exiting Quick Keys
To exit Quick Keys and remove the keypad from the display, click the Close button.
TC00089A
Figure 11-35. Quick Key Window