Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 99)

Micro-PWC OPERATOR’S MANUAL
Process Alarms 85
static until OK is clicked. Messages received while the display was frozen will be added when the display is
unfrozen.
8.4.6 Search Alarm Review Display
The Alarm Review display can be searched for the occurrence of a specific tagname. To do so, click
Search on the menu bar of the Alarm Review display. The Tag Search window will be displayed.
This window contains the prompt:
Enter tagname:
followed by a text entry box. Click on the text entry box to gain focus on it, then enter the tagname to be
located. Click OK to complete the search operation. When the tagname is found, the alarm for that tag-
name is displayed on the top line of the Alarm Review display.
8.5 ADP Panel Operation
The Annunciator Display Panel (ADP) user interface is controlled by the Mini-Alarm Window. The Mini-
Alarm Window provides a soft interface window for displaying ADP group status, as well as a configuration
point for defining the action that will be taken when an ADP key is pressed.
A pushbutton located on the Mini-Alarm Window title bar is used to call up the ADP panel display. The but-
ton is the default button face color when there are no points in alarm which are assigned to ADP panel but-
tons. The button changes color to indicate if one or more of the assigned ADP groups have an alarm. If all
alarmed points are acknowledged, the button face will be red. If any of the alarmed points are not acknowl-
edged, the button will contain a white exclamation point character (!) in the middle of the button face, as
illustrated in
Figure 8-6 .
Figure 8-5. Display Frozen Window
TC00700A
Figure 8-6. ADP Button Face