Aliasing 1600 series ip telephones, Administering features – Avaya 1600 Series User Manual

Page 39

Advertising
background image

Administering Stations

Issue 5 April 2010

39

For sample Station Forms, see

Appendix C: Sample Administration Forms

.

Aliasing 1600 Series IP Telephones

Avaya Aura Communication Manager releases earlier than 5.2 do not provide native support for
1600 Series IP Telephones. On the Station Form, administer (alias) the telephones as follows:

Change Alias Station:

Alias set up type 1603/1603SW/1603-I/1603SW-I to a 4610

Alias set up type 1608/1608-I to a 4610

Alias set up type 1616/1616-I to a 4620SW/4621SW

Avaya Aura Communication Manager Release 5.2 (and later) provides native support for the
1603,1603SW, 1603-I, 1603SW-I, 1608, 1608-I, 1616, and 1616-I.

Administering Features

The following are administrable Station Features that Avaya recommends you administer for
your 1600 Series IP Telephones for maximum user experience.

Administrable Station Features

Feature

Administration

Enhanced Conference

Features

Administer Conf-dsp (conference display) on the station form as

a feature button. Doing so turns on enhanced conference

features and gives users advanced conference features.

Far End Mute

Administer fe-mute (far end mute). When this is enabled the

phone shows a “Silence” softkey on the Conference details

screen. This feature works only for trunk calls.

Send All Calls (SAC)

On the Station form, administer SAC (send-calls) as a feature

button. On the Station form to the right of where send all calls is

administered, leave the extension box empty. This feature

requires a coverage path to be administered on the station form.

Coverage Path

For normal operation, you must set up a coverage path for each

telephone. Administer the Station form to point to the appropriate

system coverage path, for example, coverage path 1.

Auto select any idle

appearance

Set Auto select any idle appearance to N (no) to optimize

answering calls.

Restrict Last Call

Appearance

Set Restrict Last Call Appearance to Y (yes).

Conference/Transfer on

Primary Appearance

Set Conference/Transfer on Primary Appearance to Y (yes) to

ensure that conference/transfer of a bridged appearance works

properly.

Advertising
This manual is related to the following products: