Avaya 1600 Series - Manual (Page 86)

Administering Telephone Options
86 Avaya 1600 Series IP Deskphones Administrator Guide
2. After entry of the command sequence, the following displays, based on the current value of
the system value NVDEBUG:
If a value different from the current NVDEBUG value is entered, the following text displays
left-justified at the top of the display:
3. Press the * button to terminate the procedure, or the # button to save the new value. If you
press the # button, the telephone displays the following text:
The telephone saves the new value.
Group Identifier
Use the following procedure to set or change the Group Identifier.
Note:
Note:
Perform this procedure only if the LAN Administrator instructs you to do so.
For more information about groups, see
The GROUP System Value on page 65.
While the telephone is on-hook and idle, press the following sequence of keys on the faceplate
of the telephone:
Mute 4 7 6 8 7 (Mute G R O U P)
Note:
Note:
Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons.
The following text displays left-justified at the top of the display:
where ddd is the Group value.
If NVDEBUG = 1: Debug mode=on
0=off #=OK
If NVDEBUG = 0: Debug mode=off
1=on #=OK
Save new value?
*=no #=yes
New value being saved
Group=ddd
New=_