Milodon Timing Covers 65500, 65501, 65555, 65600 - Manual

MILODON
2250 Agate Court
Simi Valley, Ca 93065
(805) 577-5950
Timing Chain Cover Installation
#65500, 65501, 65555, 65600
The dowel pin holes are intentionally enlarged to allow you the adjustment to properly
center the cover on the balancer. The crank centerline to dowel pin relationships may vary due to
align boring and initial machining variances from the factory.
For proper installation and a leak free seal, mount the timing cover including gaskets,
sealer and bolts only loose at this point. Install the balancer and allow the cover to find its center
on the crankshaft / balancer. In this position tighten all bolts to final torque of 21 ft/lbs while
maintaining proper cover placement.