Atlantis Land 800NV - Manual

Package contents
System requirements
Connectors
Audio output:
Audio input:
Video output: analog video output
Power:
Network: ethernet 802.3 af port, to provide power and ethernet signal to the
NetCamera.
connect here an external speaker.
connect here a microphone.
.
use this connector to use an external power supply (12V,1 A not included).
Before proceed with the product usage please check the package contents:
-IP Camera
-PoE Injector with power cord
-Mounting screws
-Quick Start Guide
-CD-ROM
Configuration
Turn on your PC and put the provided CD-Rom in your CD-Rom reader. A welcome
page will appear. Select the purchased NetCamera and click on “Intelligent IP
Installer” link, then follow the next steps.
1 .Click ” ” to proceed with the installation procedure Yes
- 1 - -2 -
- 4 - - 3 -
2. Select desired language an click ”Next”
3. Click to go to the next step "Next”
4 .Click to go to the next step "Next” 5 .Click to go to the next step "Next”
6 .Click to go to the next step "Next” 7 .Click ” ” then to complete
the installation procedure.
Install “Finish”
Before proceed with product installation, please make sure your system is in
compliance with the following requirements:
-Windows 98, ME, 2000, 2003, XP or Vista
-Internet Explorer 6.0 or later
QUICK START GUIDE
A02-OIPCAM1_GE01
www.atlantis-land.com
NetCamera 800NV
A02-OIPCAM1
Green: Audio output
Red: Microphone input
Video output
Power
Network (PoE)