ALFA Dual Speed Hub ADH32SB - Manual (Page 2)

FCC COMPLIANCE STATEMENT
This equipment generates and uses radio frequency energy and if not
installed and used properly, that is, in strict accordance with the
instructions provided with the equipment, may cause interference to
radio and TV reception. The equipment has been tested and found to
comply with the limits for a Class B computing device in accordance
with the specifications in Subpart B of Part 15 of FCC rules, which are
designed to provide reasonable protection against such interference in
a commercial environment. However, there is no guarantee that
interference will not occur in a particular installation.
If you suspect this equipment is causing interference, turn your hub on
and off while your radio or TV is showing interference to determine
the source of the interference.
You can try to correct the interference by one or more of the following
measures:
1. Reorient the receiving radio or TV antenna where this may be done
safely.
2. To the extent possible, relocate the radio, TV or the other receiver
away
from the equipment.
3. Plug the computer which has the equipment installed into a different
power
outlet so that equipment and the receiver are on different branch
circuits.
If necessary, you should consult the place of purchase or an
experienced radio/ television technician for additional suggestion.
CAUTION : The phone jack cannot be connected to telephone system.