Mody Pumps M-800 SERIES - Manual

M-800 SERIES
PORTABLE ELECTRIC
SUBMERSIBLE PUMP FOR
CORROSIVE & ABRASIVE
APPLICATIONS
…………………………………………………….
Model M-802T
6” NPT or Hose
25 HP (19kW)
(High Volume - Low Head)
………………………………………………………
Model M-806T
4” NPT or Hose
25 HP (19kW)
(Low Volume - High Head)
………………………………………………………
M-800 DESIGN ADVANTAGES
• Stainless Steel Strainer, Shaft, Impeller, Outlet and
Hardware for maximum corrosion resistance.
• Choice of impeller materials:
1) 316 Stainless Steel for sea water and corrosive
applications and;
2) Nitride Hardened 410 Stainless Steel for abrasive
applications. (Standard)
•
Tandem Tungsten Carbide/Tungsten Carbide and
Tungsten Carbide/Tungsten Carbide mechanical seals.
• Mechanical Seals in wholly enclosed pressure
compensated oil chamber.
• Field adjustable Nitrile Rubber-lined Diffuser/Wear Plate
Optimizes efficiency throughout the life of the pump.
Polyurethane Diffusers and Wear Plates are available.
• Automatic ON/OFF/ON Thermal Overloads embedded in Stator
Winding - requires built-in contactor optional.
• Seal Probe Sensor Option available. Requires external controls.
• 1 meter long SS Sheath protects the power cable in demanding
mine applications.
•
Equipped with Sacrificial Zinc Anodes for maximum life
in a saline fluid environment.
Mody Pumps® Inc.
2166 Zeus Court, Bakersfield, CA 93308. USA
Tel.: (661) 392-7600 • Fax: (661) 392-7601
http://www.modypump.com
E-mail: [email protected]