MP Pumps 130 Series - Manual

SERIES 130
2" x 1-1/2" End Suction Centrifugal Pump
SERIES 130 high volume centrifugal pumps are close-coupled to standard
NEMA "C" face motors. Open adaptor protects motor. All models are
available in cast iron, bronze or aluminum construction to suit a wide
variety of liquids.
All fasteners are stainless steel to reduce corrosion. Impellers are
dynamically balanced to improve efficiency and bearing life.
Standard carbon / ceramic / Viton mechanical seal is self-adjusting and
corrosion resistant to handle almost any liquid.
Completely tested "Wet End" PumPAKs are available with or without
motors and can be mounted to standard "C" frame motors in just minutes.
SPECIFICATIONS:
Suction and Discharge . . 2" x 1-1/2" NPT
Materials of Construction Bronze
Cast iron
Flow . . . . . . . . . . . . . . . Up to 160 GPM
Head Feet . . . . . . . . . . . Up to 60'
Impeller . . . . . . . . . . . . 4" semi-open
Max Solid Size . . . . . . . .53"
Motor . . . . . . . . . . . . . . Up to 3 HP
Drive Options . . . . . . . . Close coupled 184C
Close coupled 56C
Hydraulic motor .37 cu. in.
Pedestal
PumPAK
®
(without motor)
Seal . . . . . . . . . . . . . . . Special seal material combinations available
(consult factory).
Standard - carbon / ceramic / Viton
Application:
Agricultural •
Commercial •
Industrial •
OEM •