Accton Technology ES3526XA - Manual (Page 316)

Command Line Interface
4-74
4
• File information is shown below:
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot command. See
the table under the dir command for a description of the file information displayed by
this command.
Table 4-26 File Directory Information
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config file.
startup Shows if this file is used when the system is started.
size The length of the file in bytes.
Console#dir 1:
file name file type startup size (byte)
----------------------------------- -------------- ------- -----------
ES3552XA_diag_v2.2.1.8.bix Boot-Rom image Y 214124
ES3552XA_Opcode_V2.2.6.2.bix Operation Code Y 1749228
ES3552XA_V2260.bix Operation Code N 1745500
Factory_Default_Config.cfg Config File Y 5197
-------------------------------------------------------------------------
Total free space: 3345728
Console#
Console#whichboot
file name file type startup size (byte)
------------------ ------------- ------- -----------
ES3552XA_diag_v2.2.1.8.bix Boot-Rom image Y 214124
ES3552XA_Opcode_V2.2.6.2.bix Operation Code Y 1749228
Factory_Default_Config.cfg Config File Y 5197
Console#