Mac-address-table aging-time, Show mac-address-table aging-time – Accton Technology ES3526XA User Manual

Page 401

Advertising
background image

Address Table Commands

4-159

4

means to match a bit and “1” means to ignore a bit. For example, a mask of
00-00-00-00-00-00 means an exact match, and a mask of
FF-FF-FF-FF-FF-FF means “any.”

• The maximum number of address entries is 8191.

Example

mac-address-table aging-time

This command sets the aging time for entries in the address table. Use the no form
to restore the default aging time.

Syntax

mac-address-table aging-time seconds
no mac-address-table aging-time

seconds - Aging time. (Range: 10-30000 seconds; 0 to disable aging)

Default Setting

300 seconds

Command Mode

Global Configuration

Command Usage

The aging time is used to age out dynamically learned forwarding information.

Example

show mac-address-table aging-time

This command shows the aging time for entries in the address table.

Default Setting

None

Command Mode

Privileged Exec

Example

Console#show mac-address-table
Interface Mac Address Vlan Type
--------- ----------------- ---- -----------------
Eth 1/1 00-e0-29-94-34-de 1 Delete-on-reset
Trunk 2 00-E0-29-8F-AA-1B 1 Learned
Console#

Console(config)#mac-address-table aging-time 100
Console(config)#

Console#show mac-address-table aging-time
Aging time: 100 sec.

Advertising
This manual is related to the following products: