Accton Technology ES3526XA - Manual (Page 479)

Domain Name Service Commands
4-237
4
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• At least one name server must be specified before you can enable DNS.
• If all name servers are deleted, DNS will automatically be disabled.
Example
This example enables DNS and then displays the configuration.
Related Commands
ip domain-name (4-234)
ip name-server (4-236)
show hosts
This command displays the static host name-to-address mapping table.
Command Mode
Privileged Exec
Example
Note that a host name will be displayed as an alias if it is mapped to the same
address(es) as a previously configured entry.
Console(config)#ip domain-lookup
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS enabled
Default Domain Name:
.sample.com
Domain Name List:
.sample.com.jp
.sample.com.uk
Name Server List:
192.168.1.55
10.1.0.55
Console#show hosts
Hostname
rd5
Inet address
10.1.0.55 192.168.1.55
Alias
1.rd6
Console#