Control Company 4146 MINI THERMOMETER - Manual

Traceable ® is a registered trademark of Control Company ©2008 Control Company. 92-4146-00 Rev. 2 052008
SPECIFICATIONS
Range: –58 to 302°F (–50 to 150°C)
Resolution 0.1° from –20.0 to 100°C
Accuracy: ±1°C from –20 to 200°C
OPERATION
1. Slide the power “ON/OFF” switch to the “ON” position.
2. Slide the “C/F” switch to select the desired reading.
3. Press “HOLD” button once to freeze the display.
4. Press the “HOLD” button again to resume measurement.
5. Slide the power “ON/OFF” switch to the “OFF” position to conserve battery life.
6. Keep plastic housing and plastic handle away from heat source. Do not place inside oven or expose to open flame.
7. Do not immerse probe handle or cable in liquid.
BATTERY REPLACEMENT
1. Use a coin to open the battery cover on back of unit.
2. Replace with catalog number 1039.
WARRANTY, SERVICE, OR RECALIBRATION
For warranty, service, or recalibration, contact:
CONTROL COMPANY
4455 Rex Road
Friendswood, Texas 77546 USA
Ph. 281-482-1714 Fax 281-482-9448
E-mail [email protected]
www.control3.com
Control Company is ISO 9001 Quality-Certified by DNV and ISO 17025
accredited as a Calibration Laboratory by A2LA.
TRACEABLE ® MINI THERMOMETER INSTRUCTIONS