PASCO ME-6995 Road Bed Spares - Manual

®
Road Bed Spares
ME-6995
I n s t r u c t i o n S h e e t
0 12 - 1 06 5 9 A
*NOTE: When storing the Road Bed, do not crimp or fold the material. Do not roll the Road Bed into a coil that
is less than 30 cm (12 in) in diameter.
Introduction
The Road Bed Spares kit contains replacement parts for the PASCO Structures System. In addition, the Road
Bed Spares kit includes a coupler that can be used to join two Road Beds together.
Attaching the Road Bed
To attach the blue road bed to the cross-members of a bridge, first connect the Road Bed Clip to the underside of
the road bed by twisting the clip into the slot so the edges of the slot capture the clip (see Figure 1).
Included Equipment Qty Included Equipment Qty
A. Mini-car Mass (about 200g) 1 D. Photogate Flag 1
B. Road Bed (3 m)* 1 E. Road Bed Clip 24
C. Mini-car 1 F. Coupler, Roller Coaster Track 2
Related Equipment Related Equipment
Truss Set (ME-6990) Advanced Structures Set (ME-6992)
Bridge Set (ME-6991)
A
B
C
E
D
F