PERKO 0567 User Manual
PERKO Hardware
Cat. No. 0567DP0CHR Tubular Latch Set
Cat. No. 0567000CHR Tubular Latch Set
MOUNTING INSTRUCTIONS
This tubular latch set is designed to be mounted in doors 1 inch to 1-3/8 inches thick.
1).
Cut out the template below.
2).
Fold and tape on door at desired height.
3).
Mark and drill as shown on template. Note that the 3/4” hole is a tight fit into wood, so a 25/32”
clearance hole should be drilled for harder materials.
4).
Insert tubular body into door edge. Note position of stem hole. (See exploded view).
5).
Align and mount escutcheon plates.
6).
Insert handle and stem. Screw on knob and fasten set screw.
7).
Mount strike on door frame.
3/05
PERKO, INC.
0567INS1
16490 N.W. 13th Avenue
Miami, FL 33169-5707
FOLD O
VER DOOR EDGE
Center
Line
Drill 9/16” Hole
DRILL 3/4”HOLE CENTERED
ON EDGE OF DOOR ALONG
LINE OF TEMPLATE*
Cat. No. 0567DP0CHR
Cat. No. 0567000CHR
MOUNTING TEMPLATE
(SEE OVER)
*See Note in instruction #3.
1-3/16”