American Power Conversion Automatic Transfer - Manual (Page 9)

Installation
Automatic Transfer Switch - Installation and Quick Start 5
Attach rear segments to the rack
1. Insert caged nuts (provided with your enclosure) on the enclosure’s rear vertical mounting rails
at your chosen location.
2. Align the rear segments of the adjustable bracket with the caged nuts you inserted in step 1.
3. Insert and tighten mounting screws (provided).
Attach front segments to the switch
1. Align the front segments of the adjustable bracket with the four corresponding holes on the
sides of the switch.
2. Attach both front segments to the switch using two Phillips pan-head screws (provided) for each
bracket segment.
m
p
h
001
3a
m
p
h0
09
5a