Screaming_eng_span_10.eps, Specifications – Power Probe PPCT - Continuity Tester User Manual
Page 10
10
Specifications
Probe tip current: ................................ 10 mA.
Open circuit voltage: .......................... 3.0 V
Volume: ............................................... 100 dB @ 1ft. Max.
Low tone: ............................................ < 10 Ohms
High tone: ........................................... > 10 Ohms <1K Ohms
No tone: .............................................. > 1 K Ohm
Batteries:
............................................. (2)
AA
Voltage
detection
................................ 6-50
VDC
Banana Jacks ....................................... 4mm, shrouded, gold plated
Storage temperature ............................ -20°C (-4°F) to 60°C (140°F)
Operating temperature ....................... 0°C (32°F) to 50°C (122°F)
Do not exceed 24V DC.
The SCT is not intended for use in AC
circuits.