PROLiNK PHS100 Modem Installation Guide - Manual

PROLiNK HSDPA Modem Installation Guide for MAC OS
Mac OS versions supported: Tiger and Leopard on Intel hardware (MAC 0S 10.4.1 and later).
Instructions for installing the PROLiNK HSDPA Modem on the MAC OS platform:
1. Insert the USIM card into the PROLiNK HSDPA Modem.
2. Insert the PROLiNK HSDPA Modem into a free USB port and open "PROLINK_MODEM"
which should appear on the desktop.
3. Drag the icon "PROLiNK HSDPA Modem.dmg" onto the desktop.
4. Click on "PROLiNK HSDPA Modem.dmg" to open the installation file.
5. Click on "PROLiNK HSDPA Modem" to install the PHS100 and follow the installation
instructions.
6. At the end of the installation, close the "PROLiNK HSDPA Modem" file on the desktop.
7. Click on "MACUSBDriver.dmg" to install the driver for the PROLiNK HSDPA Modem and follow
the installation instructions.
8. After installing the driver, the MAC computer has to be restarted.
9. Launch the software PROLiNK HSDPA Modem from the application.
10. The installation is finished.