AGFA SNAPSCAN E10 User Manual
Owner’s guide, Snapscan e10
a
b
SnapScan e10
Owner’s Guide
!
This chapter gives you information about SnapScan and about
!
Chapter 1: Preparing the Scanner
“Preparing the Scanner” explains how to prepare your SnapScan for installation.
!
Chapter 2: Installing the Scanner for PC
This chapter shows you how to set up your SnapScan for your PC.
!
Chapter 3: Installing the Scanner for Macintosh
This chapter shows you how to set up your SnapScan for your Macintosh computer.
!
Chapter 4: Making Your First Scan
Here you find instructions on how to place reflective originals on the glass plate of your
scanner.
!
“Troubleshooting” can be helpful when you come across problems.
!
Appendix B: Technical Information
This appendix provides specifications for your SnapScan.
!
Appendix C: Regulation Compliance
This appendix gives you information about safety regulations, electromagnetic compatibility
and the declaration of conformity.
Document Outline
- Preface
- Chapter 1: Preparing the Scanner
- Chapter 2: Installing the Scanner for PC
- Chapter 3: Installing the Scanner for Macintosh
- Chapter 4: Making Your First Scan
- Appendix A: Troubleshooting
- There is no USB port free for your scanner.
- The status indicator fails to light up.
- The scanner makes an unusual noise and the scanner lamp does not move back and forth when you connect the scanner.
- The scanner lamp flickers, dims, or fails to light up.
- ScanWise cannot find the scanner (MACINTOSH ONLY).
- The driver is not found when you connect the scanner to your computer (MACINTOSH ONLY).
- You cannot scan from within your image editing software (MACINTOSH ONLY).
- Windows 98 fails to detect the scanner when you connect it for the first time (PC ONLY).
- An OEM Windows 98 system was already installed when purchasing your computer (PC ONLY).
- The e-mail function is not working (PC ONLY).
- Your problem is not solved.
- Appendix B: Technical Information
- Appendix C: Regulation Compliance