Installation location, Changing over the door hinges, Aligning the appliance – Bosch KDN32X45 Réfrigérateur-congélateur 2 portes Confort User Manual

Page 26: En 26

Advertising
background image

en

26

Installation location

Install the appliance in a dry, well

ventilated room. The installation location

should neither be exposed to direct

sunlight nor near a heat source, e. g.

a cooker, radiator, etc. If installation next

to a heat source is unavoidable, use

a suitable insulating plate or observe

the following minimum distances to a

heat source:

3 cm to electric or gas cookers.

30 cm to an oil or coal-fired cooker.

Appliances with fitted handles

must be situated at least 55 mm

from the wall on the hinge side so

that the door can be opened by 90°.

Changing over

the door hinges

We recommend that you have the door

hinges changed over by our customer

service.
Before changing over the hinges, pull out

the mains plug or disconnect the fuse.

m

Caution

Carefully place the appliance on its back.
Installation in numerical sequence.
1. Changing the door handle. Fig. */B
2. Changing over the door hinges.

Fig. */A

Aligning the appliance

Place the appliance in the designated

location and align. The appliance must

be level. If the floor is uneven, use

the front height-adjustable feet. Adjust

the height-adjustable feet with a wrench.

Note
The appliance must be upright. Please

align it with a spirit level.

Advertising