Installation location, Distance from wall, Reversing the door – Bosch GSN33VW30 User Manual

Page 27: Ambient temperature and ventilation, Ambient temperature, Ventilation, En 27

Advertising
background image

en

27

Installation location

A dry, well ventilated room is suitable as

an installation location. The installation

location should not be exposed to direct

sunlight and not placed near a heat

source, e.g. a cooker, radiator, etc. If

installation next to a heat source is

unavoidable, use a suitable insulating

plate or observe the following minimum

distances from the heat source:

3 cm to electric or gas cookers.

30 cm to an oil or coal-fired cooker.

The floor of the installation location must

not give way; if required, reinforce floor. If

the floor is uneven, compensate with

supports.

Distance from wall

Fig. #
A gap is not required between the

appliance and side wall. The containers

and shelves are still fully extendable.

Reversing the door

(if required)
If required, we recommend that you have

the door hinges changed over by our

customer service. You can find out the

costs for changing over the door hinges

from your appropriate customer service.

m

Warning

While changing over the door hinges,

ensure that the appliance is not

connected to the power supply. Pull out

the mains plug beforehand. To prevent

damaging the back of the appliance,

place adequate padding underneath.

Carefully place the appliance on its

back.

Note
If the appliance is placed on its back,

ensure that the wall spacer is not fitted.

Ambient temperature

and ventilation

Ambient temperature

The appliance is designed for a specific

climate class. Depending on the climate

class, the appliance can be operated at

the following temperatures.
The climate class can be found on

the rating plate. Fig. ,

Note
The appliance is fully functional within

the room temperature limits

of the indicated climatic class. If

an appliance of climatic class SN

is operated at colder room temperatures,

the appliance will not be damaged up to

a temperature of +5 °C.

Ventilation

Fig. $
The air on the rear panel of the

appliance heats up. Conduction of the

heated air must not be obstructed.

Otherwise, the refrigerating unit must

work harder. This increases power

consumption. Therefore: Never cover

or block the ventilation openings!

Climate class

Permitted ambient

temperature

SN

+10 °C to 32 °C

N

+16 °C to 32 °C

ST

+16 °C to 38 °C

T

+16 °C to 43 °C

Advertising
This manual is related to the following products: