AMX AXB-TCR - Manual (Page 26)

Programming Information
22 AXB-TC and AXB-TCR Television Controllers (& Receivers)
7. Upon completion of the upgrade, press F10 to exit SOFTROM.
Firmware can be downloaded to multiple device numbers automatically. If multiple devices are selected,
the bottom half of the loading bar will indicate the percentage complete for the selected devices.
Using NetLinx Studio
You can perform firmware upgrades for both Axcess and NetLinx devices using the options in the
Firmware sub-menu.
Axcess Master Controllers use .TSK files for firmware upgrades.
1. Choose Tools > Firmware > Axcess Firmware to open the Axcess Firmware Download dialog.
2. Adjust the Comm Settings, if necessary:
a. Click Settings to open the Communication Setting dialog.
b. Select the Communications Port to use.
c. Click OK to accept the changes and return to the Axcess Firmware Download dialog.
3. Click Browse to navigate to the directory containing the firmware file(s). Once a directory
containing one or more .TSK files is specified, a list of available .TSK files is displayed in the upper
table in this dialog.
4. Select the desired .TSK file from the list.
5. Click Query Online Devices to populate the on-line device list.
6. Select the target AXlink device from the list of online devices in the lower table.
7. Click Download to open the Confirm Communication Settings dialog, where you can review and
confirm your Comm Settings and Target Device information before the download begins.
Click Cancel to return to the Select Axcess Firmware File dialog, to edit these settings (if
necessary).
Click OK to confirm the Comm Settings and Target Device information, and download the
selected .TSK file to the specified Master, on the selected communications port.
8. The File Transfer dialog shows the progress of the download. Click Cancel to cancel the download.
FIG. 2 Loading status bar
Firmware
Device Number
Version Number
Type Number
Loading status and device number