Bosch KDD74AL20N Frigo-congelatore da libero posizionamento Inox look - Manual (Page 18)

en
18
The cleaning water must not get into
■
Opening slots in the front bottom area
of the freezer compartment,
■
Operating controls,
■
Or any lighting.
Proceed as follows:
1. Before cleaning the appliance, unplug
the mains plug or disconnect the fuse.
2. Take out the frozen food and store it in
a cool place. Place an ice block (if you
have one) on the food.
3. Clean the appliance with a soft cloth,
lukewarm water, and a little pH-neutral
detergent. The water used for rinsing
must not get into the lighting.
4. Only wipe the door seal with clean
water and then rub it until it is dry.
5. After cleaning, reconnect the
appliance to the mains and switch it
on.
6. Put the frozen food back in.
Features
To clean the appliance, all of the variable
elements can be removed.
Removing shelves
Lift the shelf and move it towards the
front.
Removing the door shelves
Lift the door shelf and remove it.
Removing the ice twister storage tank
and water container
Figure
*
1. Remove the storage tank and water
container.
2. Remove the cover of the water
container and empty the water
container.
3. Clean the individual parts of the water
container and the storage tank with
clear water, and wipe them dry with a
cloth.
Removing the water container
Figure
+
1. Remove the water container.
2. Remove the cover of the water
container and empty the water
container.
3. Clean the individual parts of the water
container with clear water, and wipe
them dry with a cloth.
Lighting (LED)
Your device is equipped with a
maintenance-free LED light.
Any repair work on the lighting must only
be carried out by the after-sales service
or authorised experts.