Installing the appliance, Location, Note the room temperature and ventilation – Bosch KDD74AL20N Frigo-congelatore da libero posizionamento Inox look User Manual

Page 8: Ambient temperature, Ventilation, Fitting spacers, Levelling the appliance, En 8

Advertising
background image

en

8

Installing the appliance

Location

The ideal installation location is a dry,

well-ventilated room. The installation

location should not be subject to direct

sunlight or near a heat source, such as a

cooker, heating element, etc. If setting up

the appliance next to a heat source is

unavoidable, use a suitable insulating

plate or observe the following minimum

distances from the heat source:

3 cm from an electric or gas cooker.

30 cm from oil or solid fuel cookers.

Appliances with fixed handles require a

distance of at least 55 mm from the wall

on the hinged side so that the door can

be opened by 90°.

Note the room temperature and

ventilation

Ambient temperature
The appliance is designed for a certain

climate class. Depending on the climate

class, the appliance can be operated at

the following ambient temperatures.
The climate class is specified on the

rating plate. Figure

,

Note
The appliance can function within the

ambient temperature limits of the

specified climate class. If an appliance in

the SN climate class is operated at lower

ambient temperatures, damage to the

appliance can be excluded up to a

temperature of +5 °C.

Ventilation
Figure

#

The air on the appliance's back panel

and side panels heats up. The heated air

must be able to escape unimpeded.

Otherwise, the refrigerating unit has to

work harder, which increases the

appliance's power consumption.

Therefore: You must never cover or

block the ventilation openings!
The minimum distance to all sides must

be at least 5 cm.

Fitting spacers

Figure

$

Use the screws to attach the spacers

provided to the relevant openings at the

rear of the appliance. This will maintain

the minimum distance from the wall, thus

providing adequate ventilation.
If the appliance is standing at an angle,

this may mean that the doors do not

close correctly.

Levelling the appliance

Figure

%

To ensure that it functions properly, the

appliance must be set level using a spirit

level.
If the appliance is standing at an angle,

this may mean that the doors do not

close correctly.

Climate class

Permissible ambient

temperature

SN

+10 °C to 32 °C

N

+16 °C to 32 °C

ST

+16 °C to 38 °C

T

+16 °C to 43 °C

Advertising
This manual is related to the following products: