Hauler Racks Universal Steel Econo Truck Rack (STE2-1) - Manual

1 of 8
HAULER RACKS, INC.
7109 31
st Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
PRORAC CONTRACTOR SERIES
UNIVERSIAL STEEL ECONO TRUCK RACK
INSTALLATION INSTRUCTIONS
500 Lb. Capacity
Package Contents:
Parts
Hardware
(4) Legs (12) 3/8”-16 x 1-1/4” Hex Head Bolts (36) Flat Washers
(4) Load Plates (4) 3/8”-16 x 2-3/4” Hex Head Bolts (12) 3/8” Split Lock Washers
(2) Outer Crossbars (4) 3/8”-16 x 4-1/2” Hex Head Bolts (12) 3/8”-16 Nylon Insert Locknuts
(2) Inner Crossbars (4) 3/8”-16 x 5” Hex Head Bolts (12) 3/8”-16 Nuts
(6) 2” Square End caps (1) Tube of Silicone
(2) 1-3/4” Square End caps
Before you begin:
Do not carry more than 500 pounds (227KG) of combined cargo and accessories on ProRac crossbars. Distribute loads evenly across both
crossbar. ProRac cannot warranty loads that exceed this limit.
Remove all components from the shipping carton and read the instructions thoroughly to familiarize yourself with the assembly sequence.
Gather the following tools used to assemble and install the rack.
9/16” Socket and open end wrench
3/8” dia drill bit and drill
Marker
Tape measure
Tape